Citronic MPCD-4 Ultima, Руководство пользователя, Страница: 4 / 35

®
Setting up the MPCD-4 Ultima
1.Checking the Contents
Check that the carton contains the following items:
1. Main unit
2. Control unit
3. Operating instructions
4. Pair of 8-pin Din connector cables
4. Pair of RCA phono leads
5. A pair of 3.5mm mini jack leads
6. An AC power cord
2. Installing the Unit
1. Place your unit on a flat surface or mount it in a
secure rack mount case.
2. Be sure the player is mounted in a well ventilated
area where it will not be exposed to direct sunlight,
high temperatures, or high humidity.
3. Try to place the unit as far as possible from TVs and
tuners, as the unit may cause undesirable
interference.
CAUTION:
The player will work normally when the main unit is
mounted with the front panel at within 15 degrees of
the vertical plane. If the unit is tilted excessively,
discs may not be loaded or unloaded properly.
Compact Discs
1. Precautions on handling compact discs
•
Do not allow fingerprints, oil or dust to get
on the surface of the disc.
•
If the disc is dirty, wipe it off with a soft dry
cloth.
•
Do not use benzene, thinner, water, record
spray, Electrostatic-proof chemicals, or
silicone-treated cloths To clean discs.
•
Always handle discs carefully to prevent
damaging the Surface; in particular when
removing a disc from its Case or returning
it.
•
Do not bend the disc.
•
Do not apply heat.
•
Do not enlarge the hole in the center of the
disc.
•
Do not write on the label (printed side) with
a hard tipped Implement such as a pencil or
ballpoint pen.
•
Condensation will form if a disc is brought
into a warm area from a colder one, such
as outdoors in winter. Do not attempt to dry
the disc with a hair dryer, etc.
2. Precaution on storage
•
After playing a disc, always unload it from
the player.
•
Always store the disc in the jewel case to
protect from dirt or damage.
•
Do not place discs in the following areas:
Areas exposed to directs sunlight for a
considerable time. Areas subject to
accumulation of dust or high humidity.
Areas are affected by heat from indoor
heaters, etc..