Citrix ADC MPX 5550 Скачать руководство пользователя страница 56

Страница: 56 / 218

Citrix ADC MPX

Note:

the following points regarding the network ports on 14000 FIPS appliances:

• 10G ports do not support 1G copper or 1G fiber transceivers.
• 40G ports do not support 10G and 1G transceivers.

The following figure shows the back panel of the 14000-40G appliance.

Figure 2. Citrix ADC MPX 14020/14040/14060/14080/14100-40G (4x40G QSFP+, 16x10G SFP+), back
panel

The following components are visible on the back panel of the MPX 14000-40G appliance:

• Two 300 GB or larger removable solid-state drives in a redundant array of independent disks

(RAID) devices. In a RAID configuration, the same data is stored on multiple drives to improve

performance, increase storage capacity, lower the risk of data loss, and provide fault tolerance.

The two SSDs store the same data. If one fails and you replace it, the new SSD mirrors the other

one.

Note:

Drive densities might increase as components become EOL but its size is never smaller

than the original.

• Power switch. This switch turns the power to the appliance on or off. Press the switch for less

than two seconds to shut off the power.

• Two power supplies. Each power supply is rated at 1000 watts, 100–240 volts. Each power sup-

ply has an LED that indicates the status of the power supply, as described in

Common hardware

components

•

Disable alarm button

. This button is functional only when the appliance has two power sup-

plies. Press this button to stop the power alarm from sounding when one of the following con-
ditions is true:

–

You have plugged the appliance into only one power outlet.

‒

Содержание ADC MPX 5550





















































































































































































































Результаты поиска

Содержание ADC MPX 5550

Отзывы:

Бренды по названию

Популярные бренды

Citrix ADC MPX 5550, Руководство пользователя

Результаты поиска

Содержание ADC MPX 5550

Отзывы:

Бренды по названию

Популярные бренды