Citrix ADC MPX 5550 Скачать руководство пользователя страница 29

Страница: 29 / 218

Citrix ADC MPX

• Two 10/100/1000Base-T copper Ethernet management ports (RJ45), numbered 0/1 and 0/2 from

left to right. The management port is used to connect directly to the appliance for system ad-
ministration functions.

• Six 10/100/1000Base-T copper Ethernet ports numbered 1/1, 1/2, 1/3, 1/4, 1/5, and 1/6 from left to

right.

The following figure shows the back panel of the MPX 5550/5650 appliance.

Figure 2. Citrix ADC MPX 5550/5650 appliance, back panel

The following components are visible on the back panel of the MPX 5550/5650 appliance:

• 160 GB or larger removable solid-state drive (SSD).

Note:

Drive densities might increase as components become EOL but its size is never smaller

than the original.

• Power switch, which turns off power to the appliance, as if you were to unplug the power supply.

Press the switch for five seconds to shut off the power.

• USB port (reserved for a future release).

• Non-maskable interrupt (NMI) button, which is used at the request of Technical Support to pro-

duce a Citrix ADC core dump. Use a pen, pencil, or other pointed object to press this red button,

which is recessed to prevent unintentional activation.

• Single power supply, rated at 300 watts, 110–220 volts.

For information about installing the rails, rack mounting the hardware, and connecting the cables,
see

Installing the Hardware

For information about performing the initial configuration of your appliance, see

Initial Configuration

Citrix ADC MPX 5900

September 19, 2022

The Citrix ADC MPX 5900 appliance is a 1U appliance. This platform has a single 8-core processor and

16 GB of memory. The appliance provides a total of eight network ports:

‒

Содержание ADC MPX 5550





















































































































































































































Результаты поиска

Содержание ADC MPX 5550

Отзывы:

Бренды по названию

Популярные бренды

Citrix ADC MPX 5550, Руководство пользователя

Результаты поиска

Содержание ADC MPX 5550

Отзывы:

Бренды по названию

Популярные бренды