Citizen JDVD3020B, Руководство по эксплуатации

Страница: 42 / 133

42
Preparation / Status display of disc
NOTE:
If the unit does not operate properly:
Static electricity, etc., may affect the play-
er's operation. Disconnect the AC power
cord once, then connect it again.
DVD
Audio CD
To make status display disappear, press DISPLAY/CALL again.
Status display of disc
Press DISPLAY/CALL twice. The status display of the disc will
appear on the screen.
• When you play a CD disc, the status display will appear
and remain on the screen.
1
2
3
Insert the AC cord plug into a standard 120V 60Hz polarized
AC outlet.
• If the AC cord plug is plugged in for the first time, wait for
about 5 seconds before pressing POWER .
NOTE: When connecting to other equipment, unplug the unit
from the AC outlet.
Press POWER on the unit or on the remote control to turn on
the unit. The POWER indicator will light.
• Every time you press
POWER , the TV/DVD starts from TV
mode.
• When using an amplifier, switch on the amplifier.
Press DVD to select DVD mode.
The DVD startup screen will ap-
pear on the screen.
The following pages describe the
setup/operation in DVD mode.
No Disc
Disc operation
00:34:56 01:12:33
1/9 Title 1/99
1/8
1/32
Chapter 1/999
Eng Dolby Digital
Eng
Title number
Chapter number
Title elapsed playing time
Title total time
Camera angle
Type of audio
Subtitle language
Audio language
34:56 71:33
Track 11/99
Disc operation
Track number
Track total time
Track elapsed playing time
Preparation
Before DVD/CD operation, please make preparations as follows.
5K90201AE(40-45) 6/1/04, 14:20 42