39
Advanced VCR functions
Stereo recording and playback / Second Audio Program (SAP)
When an MTS STEREO broadcast is
received, the word STEREO will ap-
pear on the screen and the program can
be viewed or recorded in stereo.
The Hi-Fi STEREO recording procedure
is the same as for normal recordings.
NOTES:
When playing back a tape that is not
recorded in Hi-Fi stereo mode, the
audio will automatically be monaural.
When listening to a VHS Hi-Fi video
tape or MTS broadcast through the
VHF/UHF jack (Audio/Video cord not
connected), the sound will be monau-
ral.
Stereo recording and playback
The VHS Hi-Fi audio system permits high
fidelity recording of MTS STEREO TV
broadcasts.
NOTE:
When using a CABLE TV system, stereo TV programs may be
transmitted over a mono cable channel. In this case the word
"STEREO" will not appear and the sound will be in mono.
When viewing an MTS STEREO TV program, or playing a prerecorded
VHS Hi-Fi STEREO video tape, press
AUDIO SELECT
to select how
the audio will be heard through the speakers. Normally set to the Hi-Fi
STEREO position, this button can be set to the MONO position if the
stereo broadcast or videotape audio is of poor quality. The "R" and "L"
positions allow the audio from the Right or Left Hi-Fi channel to be heard
over both TV speakers. This button has no effect when viewing a MONO
video tape or TV program. Each time when you press the button, output
selection display appears on the screen for several seconds. Refer to
the chart below.
Output selection
OUTPUT
SELECTION
STEREO
L ch
R ch
MONO
SOUND HEARD ON BOTH
SPEAKERS
STEREO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO
Your unit is fitted with a SAP broadcast system which enables
you to switch to a second audio program when viewing a se-
lected channel.
This function applies only when the program is broadcast in
multi-languages through the SAP broadcast system.
Second Audio Program (SAP)
When the unit is turned on or a channel selection is made, make
certain the letters "SAP" appear on the screen. This means that the
"Second Audio Program" broadcasting is available.
Listening to SAP
OR
•
•
Press
TV MENU
in the TV/VCR mode. Then press
or
to
select
option. Press
or
to select “AUDIO”, then
press
.
1
2
Press
or
to select “SAP”.
Then press
or
to select “ON”.
Then press
TV MENU
until the
menu screen is cleared.
STEREO
STEREO SAP
SAP
BASS
TREBLE
BALANCE
SURROUND
OFF
STABLE SOUND
OFF
SAP
ON
0
0
0
/
/
/
/ CANCEL / MENU
5K90201AE(38-39)
6/1/04, 14:19
39
Содержание JDVD3020B
Страница 66: ...19 JDVD3020B 3 29 33 38 41 52 60...
Страница 131: ......
Страница 132: ......
Страница 133: ...04 06 U Imprim en Tha lande...