Cissell CSHW35-HW55-164, Инструкция по эксплуатации

Страница: 21 / 33

21
4
Remarks:
Freely programmable stop-function
Before starting a program it is possible to preprogram a time stop in every
program segment . This function permits special additional functions like adding
bleach or extra detergent to the wash bath.
Programming:
After selecting the program, press the ECO-button (E) and keep it depressed .
Now push the START-button (S) simultaneously and release same . Only now
release the ECO-button (E) .
The left display now shows “ StO ” (Stop) and the right display shows the program
number. The first program sequence LED is switched on.
Confirm by pressing the START-button (S) if a time stop is required in this phase
of the program. If no time stop is needed, press the ECO-button (E) to move on
to the next segment of the program. Run through the entire program in this way.
If needed, return to previous segments by pressing the SELECT-button (P).
Errors can be corrected by returning to the erroneously programmed time stop
in the segment and correcting by pressing the START-button (S).
After the final program segment all programmed time stops will be displayed and
the left display will show “ End ”. Confirm this program by pressing the START-
button (S) again. Now start the program.
Operation:
When a stop is reached during the run of the program, the time will be stopped .
The wash bath will be filled to the appropriate level and temperature and the
programmed wash action is executed.
The left display will alternately show temperature and “StO” , while the central
display is showing “ F1 ”. Now, if so desired, additional detergents can be added.
When this has been done, press the START-button (S) to continue the run of
the program. To remove any possible remains of corrosive products in the tub,
the machine will rinse an additional 2 seconds .
Programmable automatic start
By using this function a program can be started up to 99 hours later.
Programming:
After selecting the program, press the SELECT-button (P) again and keep it
depressed.
Now push the START-button (S) simultaneously and release same . Only now
release the SELECT-button (P).
The left display now shows “ DEL ” (Delay). The central display shows “ 10 ”
(minutes). Every push on the SELECT-button (P) will add 10 minutes to the
delayed start time. Hours and minutes are separated by a decimal point: 1.5 stands
for 1 hour and 50 minutes. After 10 , the counting is done by hours .
By pressing the ECO-button (E), the delay time can be counted down.
Operation:
After having set the desired delay time, the count-down can be started by
pressing the START-button (S). During the count-down the displays blink and
the remaining time is counted down. In the last hour the displays blink faster.
When the delay time has elapsed, the program is started automatically.