Cissell ACDCMAN407, Дополнительное руководство владельца

Страница: 10 / 14

Page 10
DETAILS OF OPERATION (cont’d)
DRYING TEMPERATURE. In AUTO drying mode, pressing and holding this
button will show in the display the temperature (in Deg F) associated with the
fabric selection. In TIMED mode, pressing and holding this button will show in
the display the current temperature for the drying cycle. In the TIMED mode
only, the temperature can be changed by pressing and holding the DRYING
TEMPERATURE button and using the “up arrow” or “down arrow” buttons.
DRYING TIME. In AUTO drying mode, pressing and holding this button will
show in the display “-A-”. This indicates that the automatic drying cycle has
been selected. In TIMED mode, pressing and holding this button will show in
the display the current time (in minutes) set for the drying cycle. In the TIMED
mode only, the drying time can be changed by pressing and holding the DRYING
TIME button and using the “up arrow” or “down arrow” buttons.
COOLING TIME. In AUTO cooling mode, pressing and holding this button
will show in the display “-A-”. This indicates that the automatic cooling cycle
has been selected. In TIMED mode, pressing and holding this button will show
in the display the current time (in minutes) set for the cooling cycle. In the
TIMED mode only, the cooling time can be changed by pressing and holding the
COOLING TIME button and using the “up arrow” or “down arrow” buttons.
“UP” AND “DOWN”. These two buttons are used in conjunction with the
DRYING TEMPERATURE, DRYING TIME, and COOLING TIME buttons to
change the value of those parameters. Pressing and releasing the button will
step the value one unit at a time (slowly for the first 5 seconds and then
rapidly). Pressing and holding both buttons will show the actual temperature in
the dryer.
REPEAT LAST CYCLE. Pressing this button before starting the drying cycle
will reset all of the parameters (mode, time and temperature) from the last cycle
run. To start a new cycle, press the REPEAT LAST CYCLE button and then
START.
NON-REVERSING/REVERSING (option). Pressing this button “toggles”
between NON-REVERSING and REVERSING.
Safety Tumble
At the end of the cycle the control goes into the “Safety Tumble” mode. “-S-” will
flash in the display. If the door of the dryer is not opened in 2 minutes or the
control is not turned off, the dryer will start running in cooling for 30 minutes to
prevent wrinkles from being set in the goods.