Cissell ACDCMAN407, Дополнительное руководство владельца

Страница: 5 / 14

Page 5
DESCRIPTION OF CONTROL PANEL (cont’d)
12. LED Display. Shows cycle time. In Automatic, it shows the time used. In
Timed, it shows the time remaining. When the DRYING TEMPERATURE button
is pressed and held, the drying temperature will be displayed. When the DRYING
TIME button is pressed and held, either the total drying time or “-A-” will be
displayed depending on whether AUTO or TIMED drying has been selected.
When the COOLING TIME button is pressed and held, either the total cooling
time or “-A-” will be displayed depending on whether AUTO or TIMED cooling has
been selected.
13. DRYING. Illuminated when in the drying cycle.
14. COOLING. Illuminated when in the cooling cycle.
15. END OF CYCLE. Illuminated at the end of the cycle.
16. OPEN DOOR. Illuminated when the door is open. (START must be pressed to
restart the cycle after closing the door.)
D I S P L A Y
Display Condition
“__0” Normal display between loads. Dryer is waiting for the next
load.
“012” Normal display during drying/cooling cycle. Display shows
“time used” when in automatic and “time remaining” when in
timed mode.
“012” (flashing) The door has been opened. Close the door and press START
to continue the cycle.
“-S-” (flashing) The dryer is in the Safety Tumble mode. The cycle has ended
and the dryer can be unloaded.
“_PF” (flashing) There has been a power failure. To restart the dryer, press
ON and START. To terminate the cycle press OFF/STOP.
“FFF” (flashing) The temperature sensor has failed. The dryer cannot be run
until it is repaired.
“-A-” Indicates the automatic mode has been selected. (DRYING
TIME and COOLING TIME only).