Cisco Webex 800 Series, Руководство пользователя

Страница: 48 / 130

• Configure Cisco Phone app User settings , such as ringtones and automatic noise cancellation.
• Pair your Bluetooth
®
device to the phone.
See Settings for detailed directions.
Wi-Fi Profile Configuration
For an out of box or factory reset phone, you configure the Wi-Fi network through the startup wizard or select
Set up offline . How you configure the phone offline depends on whether the Wi-Fi network is either:
• Broadcasted
• Nonbroadcast or hidden
Add the Phone to a Broadcasted Wi-Fi Network
You add the phone to a broadcasted Wi-Fi network through the startup wizard, or offline through the Settings
app.
Before you begin
You need the following information about the Wi-Fi network:
• Network name or Service Set Identifier (SSID)
• Network security mode (None, PSK, EAP-TLS, EAP-TTLS, or PEAP)
• PIN or passkey for the security mode, if you use one
Procedure
Step 1
Swipe up from the bottom of the phone’s display to show the installed applications.
Step 2 Tap the Settings app.
Step 3
Select Network & internet > Wi-Fi .
Step 4 Tap the desired Wi-Fi network name.
If the network does not have a security mode, the phone automatically connects to the Wi-Fi network.
If the network security mode is PSK, enter the 8–63 ASCII or 64 Hex Passphrase.
Step 5 For an EAP-TLS, EAP-TTLS, or PEAP network, select the network EAP method : EAP-TLS, EAP-TTLS,
or PEAP.
Step 6
For a network with an EAP-TLS security mode, select the desired CA certificate and User certificate .
Check with your administrator for the certificate type to select and also arrange to install the certificates on
your phone.
Step 7
For a network with an EAP-TTLS or PEAP security mode, select the Phase 2 authentication method and
CA certificate option to use, and then enter the Identity and Password .
Cisco Webex Wireless Phone 800 Series User Guide
38
Phone Setup
Wi-Fi Profile Configuration