Cisco UCS X210c M6, Инструкция по установке и обслуживанию

Страница: 10 / 86

Compute Node Front Panel
System Activity LED
The LED blinks to show whether data
or network traffic is written to or read
from the compute node. If no traffic is
detected, the LED is dark.
The LED is updated every 10 seconds.
2 Power LED and Power Switch
The LED provides a visual indicator
about whether the compute node is on
or off.
• Steady green indicates the compute
node is on.
• Steady Amber indicates the
compute node is in Standby power
mode
• Off or dark indicates that the
compute node is not powered on.
The switch is a push button that can
power off or power on the compute
node. See
Front Panel Buttons, on page
3 .
1
Locator LED/Switch
The LED provides a visual indicator
that glows solid blue to identify a
specific drive.
The switch is a push button that toggles
the Indicator LED on or off. See
Front
Panel Buttons, on page 3 .
4 System Health LED
A multifunction LED that indicates the
state of the compute node.
• Steady green indicates the compute
node successfully booted to
runtime and is in normal operating
state.
• Steady amber indicates that the
compute node successfully booted
but is in a degraded runtime state.
See
System Health States, on page
5 .
• Blinking amber indicates that the
compute node is in a critical state,
which requires attention. See
System Health States, on page 5 .
3
External Optical Connector (Oculink)
that supports local console functionality.
See Local Console, on page 4 .
5
Cisco UCS X210c M6 Compute Node Installation and Service Note
2
Overview
Compute Node Front Panel