Cisco UCS Invicta C3124SA Скачать руководство пользователя

Страница: 39 / 60

4-5

Cisco UCS Invicta C3124SA Appliance Administration and Configuration Guide

OL-31370-01

Chapter 4 LUN Configuration

Check Performance

Step 1

Choose

LUN Configuration > LUNs

The

LUNs

window appears.

Step 2

Mouse over a LUN or LUN snapshot to highlight it and right click.

The right-click menu appears.

Step 3

From the right-click menu, choose Check Performance.

The LUN Performance

Information Monitor

appears.

Step 4

Mouse over a performance grid to view detailed information.

Step 5

Do any of the following:

•

To view daily performance, click the



icon in the top-right-hand corner of the performance graph.

•

To view weekly performance, click the calendar icon in the top-right-hand corner of the performance
graph.

•

To view details of a particular time frame, click your mouse and drag it over a lower time-line
interval, e.g., 17:25 to 17:50.

Delete LUN

Note

If a LUN is part of an asynchronous replication pairing, it cannot be deleted until the pairing is removed.
To remove the pairing, go to the Async Replication > Pairings menu (see

Chapter 5, “Asynchronous

Replication”

Note

You must delete all associated snapshots before a LUN can be deleted.

Tip

During the LUN deletion process, GUI performance may be negatively affected until the process

completes. The larger the LUN, the more time the process may take. We recommend deleting larger
LUNs during off-peak hours.

To perform the LUN deletion:

Step 1

Choose

LUN Configuration > LUNs

The

LUN

window appears.

Step 2

Highlight a LUN from the LUNs list by mousing over it and right click.

The right-click menu appears

Step 3

Choose the

Delete

menu option.

A delete confirmation dialog box appears.

Содержание UCS Invicta C3124SA





























































Результаты поиска

Содержание UCS Invicta C3124SA

Отзывы:

Похожие инструкции для UCS Invicta C3124SA

Бренды по названию

Популярные бренды

Cisco UCS Invicta C3124SA, Руководство пользователя

Результаты поиска

Содержание UCS Invicta C3124SA

Отзывы:

Похожие инструкции для UCS Invicta C3124SA

Бренды по названию

Популярные бренды