3-11
Cisco UCS Invicta C3124SA Appliance Administration and Configuration Guide
OL-31370-01
Chapter 3 Array Configuration
Table 3.4 displays the button functionality that is available on the Support Settings page.
Table 3-3
Support Settings Fields
Field
Description
Host Name
Name assigned to array.
Simple Mail Transfer Protocol (SMTP) ServerEnter SMTP address. Used to transmit
email across IP Networks. This is applicable only
for email being sent directly from the Cisco Array
if there is no connection to the Autosupport server
over the Internet.
SMTP Username
The SMTP user is the username used by the mail
service to send out emails from the customer's
servers.
User mail server needs to be set up to handle
customer emailing.
Autosupport CC Address
Enter the internal customer address to which
copies of Autosupport messages are sent.
The Firewall must be configured to allow access
to Port 443 outbound.
Send from Domain
Applies only when emails are being sent directly
from the Cisco Array if there is no connection to
the Autosupport server over the Internet.
Proxy URL/IP
The proxy server that the customer uses to direct
outgoing requests.
Proxy Port
The port number used when sending outgoing
requests.
Network Time Protocol (NTP) Server
Enter the NTP address. Used to synchronize the
time of the clocks of computers over the network.
Time ZoneChoose location (and its associated
time zone) from the drop-down list.
Time Zone
Choose a location (and its associated time zone)
from the drop-down list.
Table 3-4
Support Settings Button Functionality
Button
Description
Test Autosupport
A trigger that generates an Autosupport message
that is outside of the regular schedule and that
tests the Autosupport relay setting. This test
includes all usually collected data.
Post Service
Post Service button is used for triggering
communication to the Autosupport server once
the service repair or maintenance action was
performed on the system by technician.
