Installing the Rails
Procedure
Step 1
Remove the mounting template (Cisco 78-19093-01) from the accessory box. The template is designed to
show you the proper holes within which the rails and cage nuts should be placed. Once the rack holes line up
with the template, you should mark the holes so that their position is known after removing the template.
Step 2
Adjust the length of the rail by sliding the ends of the rail back and forth until they match the depth of the
rack.
Figure 23: Adjusting the Tool-less Rack Mount Rail
192517
Slide-a
djust
Step 3
Place the two hooks at each end of the rail into the first two holes at a rack unit boundary.
Figure 24: Hole Spacing for the Tool-less Rails in Relationship to a Rack Unit
192731
.250
.625
.625
.500
Cisco UCS 5108 Server Chassis Installation Guide
48
Installation
Installing the Rails