Installing the Round Hole Adapter Kit
Before installing the chassis in a round hole rack, prepare the rails by adding the adapter kit according to the
instructions in
Attaching the Round Hole Adapter Kit to the Rails (Optional), on page 46
.
Procedure
Step 1
Remove the mounting template (Cisco 78-19093-01) from the accessory box. The template is designed to
show you the proper holes within which the rails and cage nuts should be placed. Once the rack holes line up
with the template, you should mark the holes so that their position is known after removing the template.
Step 2
Adjust the length of the rail by sliding the ends of the rail back and forth until they match the depth of the
rack.
Step 3
Place the adapters and rails even with a rack boundary at each end of the rail.
Step 4
Secure the rail to the rack with the provided pan head screws as shown below.
Figure 28: Attaching the Mounting Brackets to a Round Hole Rack
279772
Cisco UCS 5108 Server Chassis Installation Guide
51
Installation
Installing the Round Hole Adapter Kit
