Cisco SPA50 Series Скачать руководство пользователя страница 63

Страница: 63 / 67

Using Advanced Phone Features

Using the Interactive Voice Response Menu on the Cisco SPA501G

Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide

73738

Restore the phone to the factory default software and settings.

Enter 1 to confirm, or * to exit. If you chose to reset, hang up to exit and
begin the restore process.

87778

Restore the phone’s user settings to the default. (Clears all user settings
such as speed dials.)

Enter 1 to confirm, or * to exit. If you chose to reset, hang up to exit and
begin the restore process.

732668

Reboot the phone. After entering #, hang up to begin rebooting.

111

Set a static IP address. Enter the address (use * to enter the “.” value),
then press #.

To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.

NOTE

DHCP must be disabled to use this option; if DHCP is not

disabled, you receive an error message.

121

Set a netmask. Enter the address (use * to enter the “.” value), then press
#.

To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.

NOTE

DHCP must be disabled to use this option; if DHCP is not

disabled, you receive an error message.

131

Set a gateway. Enter the address (use * to enter the “.” value), then press
#.

To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.

NOTE

DHCP must be disabled to use this option; if DHCP is not

disabled, you receive an error message.

161

Set the address of the primary Domain Name Server (DNS). Enter the
address (use * to enter the “.” value), then press #.

To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.

181

Set the IP multicast address (used by a

Cisco Voice System

communicate with the IP phone). Enter the address (use * to enter the “.”
value), then press #.

To save, press 1. To review the value you entered, press 2. To re-enter,
press 3. To exit, press *.

Number

Option

Содержание SPA50 Series




































































Результаты поиска

Содержание SPA50 Series

Отзывы:

Похожие инструкции для SPA50 Series

Бренды по названию

Популярные бренды

Cisco SPA50 Series, Руководство пользователя

Результаты поиска

Содержание SPA50 Series

Отзывы:

Похожие инструкции для SPA50 Series

Бренды по названию

Популярные бренды