Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520-U Models)
9
Placement Tips
Make sure that you install the SRP in a location that meets these
environmental conditions:
• Storage Temperature
(sea level) -22° F to 140° F (-30° C to +60° C)
• Operating Temperature
(sea level) 32° F to 104° F (0° C to 40° C)
• Relative Humidity
(sea level) 5 to 95% RH (non-condensing)
C
AUTION
Do not stack or place anything on top of the SRP, or install it on
a hot surface.
Desk Placement
To mount the SRP on a desktop, place the device on a flat surface so it sits
on its four rubber feet.
Wall Mounting
When mounting the SRP horizontally, position it so that the back panel
faces upward. This reduces strain on the cable connections. When
mounting it vertically, position the SRP so the USB ports face downward.
S
TEP
1
Secure two number-six pan-head tapping screws, 3/4-inch (19 mm)
in length, 150 mm apart into a wall for horizontal orientation or
108 mm for vertical orientation, with the space between the
underside of each screw head and the surface of the wall equal to
5/32 inch (4mm).
C
AUTION
For drywall installation, secure the screws by using two
hollow-wall anchors (1/8 inch with 5/16-inch drill bit, or M3
with 8-mm drill bit). Without proper anchoring, the strain of
the network cable connections could pull the SRP from
the wall.
S
TEP
2
Locate the mounting screw slots on the bottom of the SRP, and
then hang it on the screws.
