Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520-U Models) 11
S
TEP
6
Connect the AC power plug into an electrical outlet.
S
TEP
7
Orient the antenna vertically.
S
TEP
8
Press the On/Off switch to the On position.
The POWER/SYS light on the front panel flashes green while the
SRP boots. After booting, the light turns solid green.
The hardware installation is now complete.
Verifying the Hardware Installation
To verify the hardware installation, complete these tasks:
•
Check the cable connections.
•
Check the lights, as described in
Front Panel Lights, page 4
. Verify that
the POWER/SYS light is solid green.
If you encounter problems, go to the Cisco Small Business Support
Community website at
www.cisco.com/go/smallbizsupport
. For technical
documentation and other links, see
Where to Go From Here, page 14
.
195791
12VDC
LAN (10/100)
WAN (10/100)
2
1
1
2
3
4
LINE (FXO)
PHONE (FXS)
5
