12 Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520-U Models)
Getting Started with Device Configuration
To log in to the Services Ready Platform Configuration Utility, follow these
steps:
S
TEP
1
Configure your computer to use DHCP for its LAN connection.
Using an Ethernet cable, connect your computer to an available
LAN port (1-4) on the SRP. Your computer will automatically obtain
an IP address in the 192.168.15.x range.
S
TEP
2
Open your web browser.
In the address bar, enter the default IP address:
http://192.168.15.1
S
TEP
3
When the login page appears, enter the username and password
(case sensitive).
The default username is
admin
.
The default password is
admin
.
N
OTE
If your SRP was provided by a service provider, they will
provide you with the appropriate login credentials.
S
TEP
4
After you log in, the Services Ready Platform Configuration Utility
opens.
S
TEP
5
From the Main menu, choose
Quick Setup > Basic Configuration
Setup
to configure the WAN, LAN, Wireless, and Remote
Provisioning settings for your SRP.
For detailed configuration information, click the Help link from the
configuration utility, or see the Cisco SRP500 Series Services
Ready Platforms Administration Guide at:
www.cisco.com/go/srp500resources
.
6
