manualshive.com logo in svg

Cisco PXM Version 1.1, Руководство пользователя, Страница: 79 / 110

Поделиться
Скачать
Cisco PXM Version 1.1 Скачать руководство пользователя страница 79

 

4-39

Cisco Carrier Sensitive Routing User Guide

 

Chapter4       CSR GUI Functionalities

Updating Inactive Datasets

Verifying Datasets

To verify whether a dataset is valid, click Verify Dataset in the Dataset Commands area.

This command ensures that all the provisioned data for the active dataset is valid. If the dataset is not 
valid, it cannot be loaded into the active CSR memory. After verification, a message with the verification 
results appears.

Note

You can use a name and an ID for a carrier, contact, contact list, route attribute, match pattern, route, 
and rule. The ID must be unique.

Updating Inactive Datasets

This section describes how to update inactive datasets by using the Inactive Dataset tab in the CSR 
window to create, modify, and delete the following items.

•

Carriers

•

Contacts

•

Contact lists

•

Egress and ingress route attributes

•

Match patterns

•

Routes

•

Rules

Содержание PXM Version 1.1















































































































Отзывы:

Нет отзывов