manualshive.com logo in svg

Cisco PXM Version 1.1, Руководство пользователя, Страница: 68 / 110

Поделиться
Скачать
Cisco PXM Version 1.1 Скачать руководство пользователя страница 68

 

4-28

Cisco Carrier Sensitive Routing User Guide

Chapter4      CSR GUI Functionalities

Updating Active Datasets

hour(0-23):min (0-60):sec (0-60)

b.

If you select Weekly, select day of the week from the pull-down menu and enter the Start Time and 
the End Time.

c.

If you select Absolute, enter the Start Date, Start Time, End Date, and End Time.

The Start Date is the date when the ingress route attribute becomes active. The End Date is the date 
when it becomes inactive.

Use the formats shown in the example at the bottom of the Date/Time area:

4 digit year-2 digit month-2 digit day 

for date, as in 2002-12-03

hour(0-23):min (0-60):sec (0-60) 

for time, as in 12:59:10

d.

If you select Constant, this indicates that the ingress route attribute applies at all times of all days.

Note

If two RouteAttributes exist in the same time frame with the same date and time constraint, 
the RouteAttribute is “nondeterminstic.” That is, the order of selection among time intervals 
of the same type that overlap cannot be determined.

Step 9

In the Available Routes box, click Add or Remove  to add or remove a route from the Associated Routes 
box respectively.

Step 10

Click

 

Add

 

to add this ingress route attribute, or click

 

Cancel

 

to exit.

Modifying Ingress Route Attributes

Step 1

In the Active Dataset tab in the CSR window, click the  down arrow in the Selection box, then select 
Ingress Route Attributes  from the pull-down menu.

Step 2

Click the down arrow in the Carriers box, then select the appropriate carrier from the pull-down menu. 
A list of Ingress Route attribute names of the selected carrier appears.

Step 3

In the list, select an ingress route attribute by double-clicking that attribute. Ingress Route Attributes 
information similar to the following appears (

Figure4-29 “Dialog Box for an Existing Ingress Route 

Attribute in Active Dataset”

):

Содержание PXM Version 1.1















































































































Отзывы:

Нет отзывов