manualshive.com logo in svg

Cisco PXM Version 1.1, Руководство пользователя, Страница: 16 / 110

Поделиться
Скачать
Cisco PXM Version 1.1 Скачать руководство пользователя страница 16

 

1-4

Carrier Sensitive Routing User Guide

Chapter1       Overview of Cisco Carrier Sensitive Routing

CSR Basics

Ingress Rejection Rules

•

Reject Max Origination Percentage

•

Reject Max Ingress Units

•

Reject Max Ingress Units per Route

Egress Rejection Rules

•

Reject Egress Cost Greater than Ingress

•

Reject Insufficient QoS

•

Reject Max Egress Units Exceeded

•

Reject Max Egress Units per Route Exceeded

•

Prevent ITSP to ITSP

Selection Rules

•

Select Min Cost per Egress Route

•

Select Best QoS

•

Select Same Carrier

•

Select Percentage Egress

•

Select Preferred Carrier

CSR operates on an internal copy of the active dataset, which is loaded from the active dataset of the 
postgreSQL database. CSR can also operate without the postgreSQL database running as long as it has 
an active dataset. For more information on the active dataset, see the 

“ Loading the Active Dataset”  

section on page4-44

.

CSR GUI

The CSR GUI provides an interface that can be used to enter, change, and modify provisioned data in 
the postgreSQL database. You can import data into the database with the import capabilities provided 
by postgreSQL. The CSR GUI can run on Sun/Solaris and Microsoft NT platforms.

Содержание PXM Version 1.1















































































































Отзывы:

Нет отзывов