manualshive.com logo in svg

Cisco PXM Version 1.1, Руководство пользователя, Страница: 58 / 110

Поделиться
Скачать
Cisco PXM Version 1.1 Скачать руководство пользователя страница 58

 

4-18

Cisco Carrier Sensitive Routing User Guide

Chapter4      CSR GUI Functionalities

Updating Active Datasets

Step 5

In the Cost  box, enter cost associated with this contact. The entry must be greater than 0. This is optional.

Step 6

In the Priority  box, enter priority of this contact. The entry must be greater than 0. This is optional.

Step 7

Click

 

New

 

to add this contact, or click

 

Cancel

 

to exit.

Modifying Contacts

Step 1

In the Active Dataset tab screen in the CSR window, click the down arrow in the Selection box, then 
select  Contacts from the pull-down menu.

Step 2

In the Contacts area, select a contact by double-clicking on that contact on the list. Contact information 
similar to the following appears (

Figure4-22 “Dialog Box for an Existing Contact in Active Dataset”

):

Figure4-22 Dialog Box for an Existing Contact in Active Dataset

Step 3

Change the information accordingly.

Step 4

Click Modify  to save the changes, or click

 

Change

 

to cancel the changes.

Deleting Contacts

Step 1

In the Active Dataset tab in the CSR window, click the  down arrow in the Selection box, then select 
Contacts from the pull-down menu.

Содержание PXM Version 1.1















































































































Отзывы:

Нет отзывов