4-33
Cisco Carrier Sensitive Routing User Guide
Chapter4 CSR GUI Functionalities
Updating Active Datasets
Figure4-33 QoS Relationships Dialog Box in Active Dataset
a.
In the Ingress Carrier box, click the down arrow, then select the ingress carrier from the pull-down
menu.
b.
In the Egress Carrier box, click the down arrow, then select the egress carrier from the pull-down
menu.
c.
In the QoS Value box, enter a number larger than zero.
d.
Click Add or Remove to add or remove the QoS relationship.
e.
Click OK to complete adding the relationship or click
Cancel
to exit without adding the
relationship.
Step 6
In the Available Patterns box, select a pattern and click Add to add a pattern to the route. The patterns
in this box are not bound to this route until they are added to the Patterns in Route box. Click Remove
to remove a pattern bound to the route.
Note
A pattern can be bounded to only one route at a time. If you add a pattern to the Patterns in
Route list, that pattern is removed from all other routes.
Step 7
Click Add to add this route, or click
Cancel
to exit.
Modifying Routes
Step 1
In the Active Dataset tab in the CSR window, click the down arrow in the Selection box, then select
Match Patterns from the pull-down menu.
Step 2
In the Routes area, select a route by double-clicking the route. Routes information similar to the
following appears (
Figure4-34 “Dialog Box for an Existing Route in Active Dataset ”
):
Содержание PXM Version 1.1
Страница 12: ...xii Cisco Carrier Sensitive Routing User Guide Preface Obtaining Technical Assistance ...
Страница 18: ...1 6 Carrier Sensitive Routing User Guide Chapter1 Overview of Cisco Carrier Sensitive Routing CSR Limitations ...
Страница 90: ...A 4 Cisco Carrier Sensitive Routing User Guide AppendixA Logging Viewing Logs ...
Страница 104: ...B 14 Cisco Carrier Sensitive Routing User Guide AppendixB Data Schema Dataset Schema ...