Cisco PA-2FEISL-FX Скачать руководство пользователя страница 55

Страница: 55 / 58

4-11

PA-2FEISL 100BASE-T Fast Ethernet/ISL Port Adapter Installation and Configuration

OL-3475-02

Chapter 4 Configuring the PA-2FEISL

Checking the Configuration

Note

The ouputs that appear in this document may not match the output you receive when running these
commands. The outputs in this document are examples only.

Cisco 7100 Series Routers

With the

show interfaces

type

slot/por

t command, use arguments such as the interface type (for

example, fastethernet) and the port number (slot/port) to display information about a specific interface
only. The following example of the

show interfaces fastethernet

command shows information specific

to a Fast Ethernet interface on a PA-2FEISL in slot 4:

Router#

show interfaces fastethernet 4/0

FastEthernet4/0 is administratively down, line protocol is down

Hardware is DEC21140, address is 1.1.1.11 (bia 0000)

Internet address is 10.0.0.0

MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, rely 255/255, load 1/255

Encapsulation ARPA, loopback not set, keepalive not set, fdx, 100BaseTX

ARP type: ARPA, ARP Timeout 4:00:00

Last input 3:08:43, output 3:08:42, output hang never

Last clearing of “show interfaces” counters 2:58:36

Output queue 0/40, 0 drops; input queue 0/75, 0 drops

5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

0 packets input, 0 bytes, 0 no buffer

Received 0 broadcasts, 0 runts, 0 giants

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

0 watchdog, 0 multicast

0 input packets with dribble condition detected

0 packets output, 0 bytes, 0 underruns

0 output errors, 0 collisions, 0 interface resets, 0 restarts

0 babbles, 0 late collision, 0 deferred

0 lost carrier, 0 no carrier

0 output buffer failures, 0 output buffers swapped out

Note

For the Cisco 7206VXR and the Cisco 7206 router shelves, the

show interfaces

command requires a

shelf number in the format

show interfaces

type shelf number/port adapter slot/interface

The Fast Ethernet interface port adapter is numbered as port adapter 4. The Fast Ethernet ports on the
PA-2FEISL are interfaces 0 and 1.

Cisco 7200 Series and Cisco uBR7200 Series Routers

With the

show interfaces

type

slot/por

t command, use arguments such as the interface type (for

example, fastethernet) and the port number (slot/port) to display information about a specific interface
only. The following example of the

show interfaces fastethernet

command shows information specific

to a Fast Ethernet interface on a PA-2FEISL in slot 4:

Router#

show interfaces fastethernet 4/0

FastEthernet4/0 is administratively down, line protocol is down

Hardware is DEC21140, address is 1.1.1.11 (bia 0000)

Internet address is 10.0.0.0

MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, rely 255/255, load 1/255

Encapsulation ARPA, loopback not set, keepalive not set, fdx, 100BaseTX

ARP type: ARPA, ARP Timeout 4:00:00

Last input 3:08:43, output 3:08:42, output hang never

Last clearing of “show interfaces” counters 2:58:36

Output queue 0/40, 0 drops; input queue 0/75, 0 drops

5 minute input rate 0 bits/sec, 0 packets/sec

Содержание PA-2FEISL-FX



























































Результаты поиска

Содержание PA-2FEISL-FX

Отзывы:

Похожие инструкции для PA-2FEISL-FX

Бренды по названию

Популярные бренды

Cisco PA-2FEISL-FX, Руководство по установке и настройке

Результаты поиска

Содержание PA-2FEISL-FX

Отзывы:

Похожие инструкции для PA-2FEISL-FX

Бренды по названию

Популярные бренды