Cisco Nexus 93120TX, Руководство по установке

Страница: 12 / 68

The following figure shows the hardware features seen from the port side of the chassis.
Figure 1: Hardware Features on the Port Side of the Chassis
Chassis LEDs
• Beacon (BCN)
• Status (STS)
• Environment (ENV)
6 96 10GBASE-T copper ports (supporting speeds
of 100 Megabits, 1 Gigabit, and 10 Gigabits) to
other devices 1
Screw holes (2) for attaching a front-mount
bracket for four-post racks (one bracket on each
of two sides) 7 6 40-Gigabit Ethernet Quad Small Form-Factor
Plugable (QSFP+) optical ports for uplink
connections to aggregation switches 2
Screw holes (4) for attaching a center-mount rack
bracket for two-post racks (one bracket for each
of two sides) 8 Out-of-band management port (RJ-45 port) 3
Notch in both sides of the chassis for locking the
power supply end of the chassis to the
bottom-support rails 9 Console port (RS232 port) 4
Two USB ports used for saving or copying
functions
USB support is limited to USB 2.0
devices that use less than 2.5 W (less
than 0.5 A inclusive of surge current).
Devices, such as external hard drives,
that instantaneously draw more than 0.5
A are not supported.
Note
5
To determine which transceivers, adapters, and cables are supported by this switch, see the Cisco Nexus 9000
Series (Fixed 9300) at
http://www.cisco.com/c/en/us/support/interfaces-modules/transceiver-modules/
products-device-support-tables-list.html .
Cisco Nexus 93120TX NX-OS Mode Switch Hardware Installation Guide
2
Overview
Overview