2-8
Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide
OL-29233-01
Chapter 2
Attaching the Dolly to the Chassis and Removing the Chassis Pallet
Step 2
Use the 3/8-inch ratchet wrench and socket to remove the two dolly-to-chassis lift brackets (
Figure 2-7
).
Repeat this step for the second dolly unit.
Figure 2-7
Remove Lift Brackets from Dolly
Note
The lift brackets must be attached to the chassis first.
Step 3
Select a lift bracket. There are two identical lift brackets for the right front and left rear and two identical
lift brackets for the right rear and left front (
Figure 2-8
).
1
Lift bracket
3
Two lift bracket side pins on the removed lift bracket
2
M14 x 30 mm socket-head cap
screws
209077
2
2
1
3
