Cisco NC55A2-MOD-SE-H-S Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 24

background image

The multiple-fiber push-on (MPO) connectors on the optical QSFP+ or QSFP28 transceivers support network
interface cables with either physical contact (PC) or ultra-physical contact (UPC) flat polished face types.
The MPO connectors on the optical QSFP+ or QSFP28 transceivers do not support network interface cables
with an angle-polished contact (APC) face type.

Note

Step 1

Remove the dust plugs from the optical network interface cable MPO connectors. Save the dust plugs for future use.

Step 2

Inspect and clean the MPO connector’s fiber-optic end faces.

Step 3

Remove the dust plugs from the QSFP+ or QSFP28 transceiver module optical bores.

Step 4

Immediately attach the network interface cable MPO connectors to the QSFP+ or QSFP28 transceiver module (see the
figure below).

Figure 14: Cabling a 40-Gigabit QSFP+ or QSFP28 Transceiver Module

Removing the 40-Gigabit QSFP+ or 100-Gigabit QSFP28 Transceiver Module

The QSFP+ or QSFP28 transceiver module is a static-sensitive device. Always use an ESD wrist strap or
similar individual grounding device when handling QSFP+ or QSFP28 transceiver modules or coming into
contact with modules.

Caution

To remove a QSFP+ or QSFP28 transceiver module, follow these steps:

Step 1

For optical QSFP+ or QSFP28 transceiver modules, disconnect the network interface cable from the QSFP+ or QSFP28
transceiver connector.

Step 2

For QSFP+ or QSFP28 transceiver modules equipped with a bail-clasp latch (see the below figure, top view):

a) Pivot the bail-clasp down to the horizontal position.
b) Immediately install the dust plug into the transceivers optical bore.
c) Grasp the sides of the QSFP+ or QSFP28 transceiver and slide it out of the module socket.

Step 3

For QSFP+ or QSFP28 transceivers equipped with a pull tab latch (see the below figure, bottom view):

a) Immediately install the dust plug into the transceiver’s optical bore.
b) Grasp the tab and gently pull to release the transceiver from the socket.

Connect Router to the Network

18

Connect Router to the Network

Removing the 40-Gigabit QSFP+ or 100-Gigabit QSFP28 Transceiver Module

«
...
16
17
18
19
20
...
»

Содержание NC55A2-MOD-SE-H-S

























Отзывы:

Нет отзывов

Похожие инструкции для NC55A2-MOD-SE-H-S

Бренд: Quantum Страницы: 20

FieldPoint FP-3000

Бренд: National Instruments Страницы: 118

DL-DVI-Vision-IP Series

Бренд: G&D Страницы: 228

Elinx EIR510 Series

Бренд: B&B Electronics Страницы: 2

Бренд: Casablanca Страницы: 13

Бренд: AMX Страницы: 1

Бренд: TP-Link Страницы: 2

Бренд: M-system Страницы: 4

Бренд: Kramer Страницы: 56

Бренд: Kasda Страницы: 39

Бренд: HMS Страницы: 18

Бренд: Netopia Страницы: 138

Бренд: ENKHO Страницы: 48

Бренд: Hama Страницы: 45

Бренд: NetApp Страницы: 10

Бренд: D-Link Страницы: 191

Бренд: Edimax Страницы: 40

Бренд: Johnson Controls Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды