18
Cisco MS200X Series 10/100 24-Port Ethernet Access Switches
S
TEP
3
After the brackets are securely attached, the switch is now ready to
be installed into a standard 19-inch rack as shown below.
Wall Mounting
The MS200X switch can be wall-mounted by utilizing the supplied rack
mounting brackets.
W
ARNING
Insecure mounting might damage the switch or cause injury.
Cisco is not responsible for damages incurred by insecure
wall-mounting.
To mount the switch to the wall:
S
TEP
1
Determine where you want to mount the switch. Verify that the
surface is smooth, flat, dry, and sturdy.
S
TEP
2
Attach one of the supplied brackets on the side of the switch, and
use two pan head M5 screws to secure it.
S
TEP
3
Follow the same steps to attach the second bracket to the
opposite side.
