S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
1-5
Cisco MDS 9200 Series Hardware Installation Guide
OL-19588-01
Chapter 1 Product Overview
Integrated Supervisor Modules
The Cisco MDS 9200 Series supports the following additional modules:
•
The nonremovable interface module (located above the integrated supervisor module), provides the
console port (COM1 port) and the MGMT 10/100 Ethernet port for the integrated supervisor
module. See the
“Interface Modules” section on page 1-9
.
•
An optional module in the open slot (slot 2).
•
Two power supplies that are redundant by default and can be configured to be combined if desired.
•
A hot-swappable fan module with four fans provides redundancy. See the
“Fan Module” section on
page 1-36
.
Integrated Supervisor Modules
The Cisco MDS 9200 Series switches have nonremovable integrated supervisor modules in each chassis.
These modules include the following:
•
Cisco MDS 9222i Integrated Supervisor Module, page 1-5
•
Cisco MDS 9216i Integrated Supervisor Module, page 1-6
•
Cisco MDS 9216A Integrated Supervisor Module, page 1-7
Cisco MDS 9222i Integrated Supervisor Module
The nonremovable Cisco MDS 9222i integrated supervisor module provides the control and
management functions of the Cisco MDS 9222i Switch, and it includes an integrated 18-port Fibre
Channel switching and 4-port Gigabit Ethernet IP services module. The Cisco MDS 9222i integrated
supervisor module provides multiple communication and control paths to avoid a single point of failure.
Note
For description of the integrated 18/4-port Multiservice and their capabilities, see the
“18/4-Port
Multiservice Module” section on page 1-22
.
Figure 1-4
shows the Cisco MDS 9222i integrated supervisor module with an integrated 18-port Fibre
Channel and 4-port Gigabit Ethernet module.
Figure 1-4
Cisco MDS 9222i Supervisor Module with Integrated 18-Port Fibre Channel and 4-Port
Gigabit Ethernet Module
184706
1
2
4
3
