S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
2-7
Cisco MDS 9100 Series Hardware Installation Guide
OL-21514-01
Chapter 2 Installing the Cisco MDS 9100 Series
Installing the Switch in a Cabinet or Rack
Figure 2-1
Front Rack-Mount Brackets and C Brackets Installed on the Cisco MDS 9100 Series
Step 3
Install the slider rails in the rack. Position one of the slider rails against the rack mounting rails and align
the screw holes as shown in
Figure 2-2
. If you are using the notched slider rails for the Cisco MDS 9134
or the Cisco MDS 9124 Switch, see
Figure 2-3
.
Note
Depending on when you purchased your Cisco MDS 9124 Switch, you may have straight slider
rails like those shown in
Figure 2-2
, or you may have the notched slider rails like those shown
in
Figure 2-3
. Refer to the illustrations that show the type of rails that came with your switch.
Step 4
Attach the slider rail using two 12-24 screws or two 10-32 screws, depending on the rack rail thread type.
For racks with square holes, insert the 12-24 cage nuts in position behind the mounting holes in the slider
rails.
a.
Repeat with the other slider rail on the other side of the rack.
1
Front rack-mount bracket
2
C bracket
96616
1
2
