22
Chapter 5: Windows Driver Installation
Configuration of the PrintServer Driver
Wireless-G PrintServer
Configuration of the PrintServer Driver
1. The
Wireless-G PrintServer Setup
screen will automatically appear. Select the appropriate printer, and then
click
Next
.
2. The
Wireless-G PrintServer Diagnostic - Check Printer Driver Installation
screen will appear. Select the driver
for your printer, and click
Next
to continue.
If you need to assign a driver, then click
Assign
and follow the on-screen instructions.
If the driver for your printer is not installed, you will see a new window pop up. The message will ask you to
exit the Wizard and install the driver for your printer. Click
OK
and install the driver. After the driver has been
installed, run the Setup Wizard and click
Driver Install
on the
Welcome
screen.
Figure 5-7: Wireless-G PrintServer Diagnostic - Check
Printer Driver Installation
Figure 5-6: Wireless-G PrintServer Setup
NOTE:
If the PrintServer is not listed, then click
Refresh
. If the PrintServer cannot be found, then
select
Disable Firewall when Searching PrintServer
and click
Refresh
again.
Figure 5-8: Printer Driver Not Installed
Содержание Linksys WPS54G
Страница 1: ......