8
Chapter 4: Configuring the PrintServer Using the Setup Wizard
Starting the Setup Wizard
Wireless-G PrintServer
Chapter 4: Configuring the PrintServer Using the Setup Wizard
Starting the Setup Wizard
To install the PrintServer, you will use the Setup CD-ROM to run the Setup Wizard. It is highly recommended that
you use a computer on the wired network to set up the PrintServer. However, if you only have a wireless network,
then you can use a computer on the wireless network to set up the PrintServer.
1. Insert the Setup CD-ROM into the computer’s CD-ROM drive. The Setup Wizard should run automatically. If it
does not, click the
Start
button and choose
Run
. In the box that appears, enter
D:\setupWizard.exe
(if “D”
is the letter of your CD-ROM drive).
2. When you see the
Welcome
screen, you have four choices:
Click
Set up PrintServer
to set up the PrintServer.
Click
Set up Computer
if you have already installed the PrintServer. Then proceed to “Chapter 5: Windows
Driver Installation”.
Click
User Guide
button to view the User Guide.
Click
Exit
to end the installation.
Installing the PrintServer
1. If you have not already done so, click
Set up PrintServer
on the
Welcome
screen.
2. You will see a screen asking you to locate your USB printer. Click
Next
to continue.
Figure 4-1: Welcome
Figure 4-2: Locate Your Printer
Содержание Linksys WPS54G
Страница 1: ......
