Appendix B
Using the Storage Link’s Storage
13
Network Storage Link for USB 2.0 Disk Drives
Appendix B:
Using the Storage Link’s
Storage
Overview
Supported versions of Windows are:
Windows 95/98/ME or later
•
Windows 2000, NT 4.0
•
Windows XP
•
The following items may need to be checked or
configured:
TCP/IP protocol
•
Network Logon (Windows 95/98/ME only)
•
Mapping to the Network Storage Link’s storage
•
TCP/IP Setup
Normally, no changes are required to each PC.
Check with your LAN administrator (or Network Storage
Link Administrator) to see if any changes are required.
Network Logon (Windows 95/98/ME only)
If your PC uses Windows 2000 or XP, ignore this section.
You do not need to make any changes to your network
configuration.
If your PC uses Windows 95/98/ME, then you must log
on to the network correctly in order to use the Network
Storage Link:
Check your Windows logon by selecting Start, Settings,
Control Panel, Network. Verify that the Primary Network
Logon is set to “Client for Microsoft Networks”. If this is
already set, there is no need to make any changes.
Network Logon
Windows will then prompt you to log on to the Network
when it boots. You must log on.
If you press
ESC
, or click
Cancel
, no network resources
will be available. When you log on, you need to use a valid
User Name and Password.
If the Network Storage Link Administrator has defined
users on the Network Storage Link, use the User Name
and password they supply.
If you use a User Name and password which is not
recognized by the Network Storage Link, you can still use
it, with guest access rights. By default, this allows read/
write access to the “public” share, but the Administrator
can set the guest access rights as they wish.
Storing Files
To store files on the Storage Link, you should “Map” a drive
letter to each folder on the Storage Link folder you wish
to access. The “Network Drive” will then be available to all
Windows programs. The procedure is as follows:
Double-click the Network Neighborhood (or My
1.
Network Places) icon on the desktop.
On the “View” menu, select Details. The Comment
2.
column will now be visible.
Locate the Storage Link If it is not listed, double-click
3.
Entire Network. Then double-click the Workgroup that
the Storage Link is in. (By default, the Storage Link is in
Workgroup.)
Locating the Storage Link
Double-click the icon for the Storage Link.
4.
Right-click a folder (directory) to which you have
5.
access, and select
Map Network Drive
.
Select a drive letter for this folder, and check the
6.
Reconnect at Logon
checkbox. (If this is not done, the
mapping will be lost when you shut down your PC.)
