78-20749-02 JANUARY 2013 Page 9 of 16 Copyright © 2013 Cisco Systems, Inc. All rights reserved.
Cisco TelePresence ISDN Link
Installation guide
Configuring the endpoint for ISDN (H320)
When paired to ISDN Link, the default call setttings for the TelePresence endpoint can be
configured for ISDN (H320), or you can set the call protocol and call rate each time you make
a call.
Configuring the default call settings to ISDN (H320)
1.
Open a web browser and log in to the TelePresence endpoint.
2.
Navigate to
Configuration > System configuration > Conference 1 > DefaultCall
and set
the
Protocol
to
H320,
and click the
Save
button.
Configuring the call settings to ISDN (H320) by each call
•
If using a Touch device, see the section:
Making a call using the Touch controller
.
•
If using a remote control, see the section:
Making a call using the remote control
.
