78-20749-02 JANUARY 2013 Page 12 of 16 Copyright © 2013 Cisco Systems, Inc. All rights reserved.
Cisco TelePresence ISDN Link
Installation guide
About manual pairing mode
You can skip this page if using the ISDN Link in automatic pairing mode.
Manual pairing mode of the ISDN Link is managed from a command line interface. Connect to
the ISDN Link through the serial port (COM) or through SSH over the network.
Supported versions
Manual pairing mode is supported from software version IL1.0, and later, for TelePresence
EX-, MX-. SX-, and C-Series running TC5. If you have TC6/IL1.1 please use automatic pairing
mode as described in the
Automatic pairing mode
section.
Manual pairing of the ISDN Link
See the ISDN Link API Reference Guide (IL1.1) for further details on manual pairing mode.
Go to:
http://www.cisco.com/go/isdnlink-docs
and navigate to the
Reference Guides >
Command References
section.
