78-20749-02 JANUARY 2013 Page 7 of 16 Copyright © 2013 Cisco Systems, Inc. All rights reserved.
Cisco TelePresence ISDN Link
Installation guide
Configuration example with PRI E1 mode
First choose from the list of menus to the left, then configure the parameters.
Navigate to H320 > General
Settings > NetType.
In this example the H320 Net
Type is:
•
PRI
Click the
Save
button.
Navigate to ISDN > PRI >
SwitchType.
In this example the ISDN PRI
Switch Type is:
•
Euro
Click the
Save
button.
Navigate to ISDN > PRI >
Interface 1.
Enter the number of high and
maximum channels for the
PRI Euro switch:
•
HighChannel: 31
•
MaxChannels: 30
Enter your ISDN PRI number:
•
NumberRangeStart: xxx
•
NumberRangeStop: xxx
Click the
Save
buttons.
Go to
Configuration > Peripherals
and check the ISDN status information to confirm there are no
errors before proceeding. If any errors, or if the power LED is red, please check your configuration.
