Cisco ISDN Link, Руководство по установке

Страница: 11 / 16

78-20749-02 JANUARY 2013 Page 11 of 16 Copyright © 2013 Cisco Systems, Inc. All rights reserved.
Cisco TelePresence ISDN Link
Installation guide
Making a call using the remote control
Press any button on the remote control
to wake up the system.
1. Press (home) button to open
the Home menu.
2. Press (right arrow) to open the
Call menu.
3. Use the numeric pad and enter the
ISDN number you want to call.
If your the default call protocol is
set to ISDN (H320), proceed to
Step 6 , else proceed to Step 4 .
4
5
6
3
(home)
(right arrow)
(call)
1
2
4. Press the fifth soft button to display the
Call Type menu. Use the arrow keys to
navigate and choose ISDN . Press (ok)
to confirm your selection.
5. Press the fourth soft button to display the
Call Rate menu. Use the arrow keys to
navigate and choose the call rate .
If dialing a telephone number, choose
Audio Only . Press (ok) to confirm your
selection.
6. Press (call) to connect the call.
Tap the green Call button to make
the call.
Connecting the call may take up
to 30 seconds. A message will
show on screen while the call is
connecting.
(ok)
(ok)