26
IR510 WPAN Gateway and IR530 WPAN Range Extender Hardware Installation Guide
Configuring IR510 and IR530 Systems
LEDs
Table 15
LEDs for IR53
0 Range Extende
r
Antenna
IR530 antenna options are noted in the table below.
For more details on the supported antenna, please refer to the document below:
Connected Grid Antennas Installation Guide
Cable Options
Refer to the
Cisco IR530 Series Resilient Mesh Range Extenders Data Sheet
for a summary of all supported cables.
Configuring IR510 and IR530 Systems
IoT Field Network Director (IoT-FND) 4.2.x release
(and later) provides the user interface for IR510 configuration. Refer to the “Managing
Cisco IR510 WPAN Industrial Routers” section within the “Managing Devices” chapter.
Related Documentation
Cisco IoT Field Network Director User Guide, Release 4.2.x
Cisco Connected Grid WPAN Module for CGR 1000 Series Installation and Cisco Resilient Mesh Configuration Guide (Cisco IOS)
LED Name
Definition
State
RSSI
Measure of power present in the received
radio signal.
Yellow (Off) / Green (Off): RSSI less than -105 dBm
Yellow (On) / Green (Off): RSSI is -105 to -95 dBm
Yellow (Off) / Green (Slow Blink): RSSI is -95 to -75 dBm
Yellow (Off) / Green (Fast Blink): RSSI is -75 to -60 dBm
Yellow (Off) / Green (Solid On): RSSI greater than -60 dBm
WPAN
WPAN traffic activity detect.
Yellow (Off) / Green (Off): WPAN port is disabled.
Yellow (On) / Green (Off): Searching for network.
Yellow (Off) / Green (Slow Blink): WPAN port is up.
Yellow (Off) / Green (Fast Blink): Route is available and DHCPv6
configuration is starting.
Yellow (Off) / Green (On): Global IPv6 address is available.
SYS
Indicates module status.
Green (Blinking): Broadcast slot time complete
Yellow (Blinking): Bootload in process
Yellow (Solid): Software update mode in process
Cisco Part Number
Description
ANT-WPAN-OM-OUT-N
Omni antenna for 900 MHz WPAN, outdoor
