Purpose
Command or Action
Enters the global configuration mode.
configure terminal
Example:
Router# configure terminal
Step 2
Enters the redundancy configuration mode.
redundancy
Example:
Router(config)# redundancy
Step 3
Configures the SSO redundancy mode of operation.
mode SSO
Example:
Router(config-redundan)# mode SSO
Step 4
Additional References
Related Documents
Document Title
Related Topic
Cisco IOS Master Commands List, All Releases
Cisco IOS commands
Cisco IOS Intelligent Wireless Access Gateway
Command Reference
iWAG commands
MIBs
MIBs Link
MIB
To locate and download MIBs for selected platforms,
Cisco software releases, and feature sets, use Cisco
MIB Locator found at the following URL:
http://www.cisco.com/go/mibs
No new or modified MIBs are supported by this
feature.
Intelligent Wireless Access Gateway Configuration Guide
OL-30226-03
59
iWAG SSO Support for GTP
Additional References
Содержание Intelligent Wireless Access Gateway
