Enabling MCSA is mandatory before you enable the Mobility feature in the Cisco ASR 1000 Series
Aggregation Services Routers.
Note
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
mcsa
4.
enable sessionmgr
DETAILED STEPS
Purpose
Command or Action
Enables the privileged EXEC mode.
enable
Step 1
Example:
Router> enable
Enter your password, if prompted.
Enters the global configuration mode.
configure terminal
Example:
Router# configure terminal
Step 2
Enables MCSA on the Cisco ASR 1000 Series Aggregation
Services Router.
mcsa
Example:
Router(config)# mcsa
Step 3
Enables MCSA to receive notifications from the Cisco ISG.
enable sessionmgr
Example:
Router(config-mcsa)# enable sessionmgr
Step 4
Configuring the GTP of the iWAG
This section describes how to configure GTPv1 for the iWAG solution.
Before You Begin
Enable mobile client service abstraction (MCSA).
Intelligent Wireless Access Gateway Configuration Guide
18
OL-30226-03
Overview of the Intelligent Wireless Access Gateway
Configuring the iWAG for 3G Mobile IP Users
Содержание Intelligent Wireless Access Gateway
