SUMMARY STEPS
1.
enable
2.
configure terminal
3.
interface GigabitEthernet slot/subslot/port
4.
description string
5.
ip address ip-address mask [secondary [vrf vrf-name ]]
6.
negotiation auto
DETAILED STEPS
Purpose
Command or Action
Enables the privileged EXEC mode.
enable
Step 1
Example:
Router> enable
Enter your password, if prompted.
Enters the global configuration mode.
configure terminal
Example:
Router# configure terminal
Step 2
Enters the interface configuration mode for Gigabit
Ethernet interface.
interface GigabitEthernet slot/subslot/port
Example:
Router(config)# interface GigabitEthernet 1/3/5
Step 3
Adds a description to an interface configuration.
description string
Example:
Router(config-if)#description interface connected
to GGSN
Step 4
Sets a primary IP address or secondary IP address for
an interface.
ip address ip-address mask [secondary [vrf vrf-name ]]
Example:
Router(config-if)# ip address 192.170.10.1
255.255.0.0
Step 5
Enables auto negotiation on a Gigabit Ethernet
interface.
negotiation auto
Example:
Router(config-if)# negotiation auto
Step 6
Enabling Mobile Client Service Abstraction
This section describes how to enable Mobile Client Service Abstraction (MCSA) for PMIPv6.
Intelligent Wireless Access Gateway Configuration Guide
OL-30226-03
17
Overview of the Intelligent Wireless Access Gateway
Configuring the iWAG for 3G Mobile IP Users
Содержание Intelligent Wireless Access Gateway
