24
Product Documentation and Compliance for the Cisco IE 5000 Switches—
Documentation produit et conformité pour les commutateurs Cisco IE 5000
78-100604-01
Removing the Power-Supply Module—Retrait du module
d'alimentation
English
The power supply modules are NOT hot-swappable. Turn off the input power to the switch before
removing either power supply modules.
Caution
Sparking may occur if power is not turned off while swapping the power supply module. This can cause
an explosion in hazardous environment
Step 1
Locate the circuit breakers, turn them OFF and tape them in the OFF position.
Note
If the power is not off at the AC or DC circuit breaker, do not touch the power-input terminal.
Step 2
Verify that the PSU LED and PSU OK LED is blinking red or is off.
Step 3
Use a Phillips screwdriver to loosen the captive screws that secure the power-supply module to the
switch. See
Warning
Hot surface.
Statement 1079
Figure 1-25
Removing the Screws
C isco IE 3010
Sw itch Series
208384
