Cisco IE-5000, Документация продукта и информация о соответствии

Страница: 10 / 32

10
Product Documentation and Compliance for the Cisco IE 5000 Switches—
Documentation produit et conformité pour les commutateurs Cisco IE 5000
78-100604-01
Installing the Power-Supply Module in the Switch
Step 1
We recommend that power be off at the AC or DC circuits. Locate the circuit breakers, turn them OFF,
and tape them in the OFF position.
Note
If the power is not off at the AC or DC circuit breaker, do not touch the power-input terminal.
Step 2
Use a Phillips screwdriver to loosen the two captive screws of the blank power-supply module and gently
pull it out. See
Figure 1-4 and Figure 1-5 .
Figure 1-4 Loosen the Screws on the Power Supply Blank
Figure 1-5 Remove the Power Supply Blank
Step 3
Insert the power-supply module into the slot, and gently push it in. See Figure 1-6 . The power-supply
module should be flush with the switch.
Figure 1-6 Insert the Power-Supply Module
Step 4
Use a ratcheting torque screwdriver to torque each screw to 8–10 in-lb (0.904-1.13 Nm).
C isco IE 3010
Sw itch Series
208382
C isco C onne
cted G rid
Sw itch 2500
Series
208383
208377