C H A P T E R
4-1
Cisco IAD2801 Series Integrated Access Devices Hardware Installation Guide
OL-12433-01
4
Chassis Installation Procedures
This document describes how to install your Cisco IAD2801 on a desktop or in a rack. It includes the
following sections:
•
Setting Up the Chassis, page 4-1
•
Installing the Chassis Ground Connection, page 4-5
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Setting Up the Chassis
You can set any Cisco IAD2801 on a desktop or install it in a rack. See the applicable instructions in the
following sections.
•
•
Setting the Chassis on a Desktop
Caution
To prevent damage to the chassis, never attempt to lift or tilt the chassis by the plastic panel on the front.
Always hold the chassis by the metal body.
Warning
Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord.
Statement 1
