Cisco HiPort, Руководство пользователя

Страница: 7 / 41

5
HiPort User Guide
Chapter 2
Installation
Table or Wall Mount Instructions
Horizontal Placement
The HiPort can be placed on a level surface near an
electrical outlet .
Wall-Mounting Placement
The HiPort has two wall-mount slots on its bottom
panel . The distance between the slots is 60 mm
(2 .36 inches) .
Two screws are needed to mount the HiPort .
Suggested Mounting Hardware
2 .
5-3
.0 mm
4-5 mm 1-1 .5 mm
Note: Mounting hardware illustrations are not
†
true to scale .
NOTE: Linksys is not responsible for damages
incurred by insecure wall-mounting
hardware .
Follow these instructions:
Determine where you want to mount the HiPort . Make 1 .
sure that the wall you use is smooth, flat, dry, and
sturdy . Also make sure the location is within reach of
an electrical outlet .
Drill two holes into the wall . Make sure the holes are
2 .
60 mm (2 .36 inches) apart .
Insert a screw into each hole and leave 3 mm
3 .
(0 .12 inches) of its head exposed .
Maneuver the HiPort so the wall-mount slots line up
4 .
with the two screws .
Place the wall-mount slots over the screws and slide
5 .
the HiPort down until the screws fit snugly into the
wall-mount slots .