2
HiPort User Guide
Chapter 1
Overview
Chapter 1:
Product Overview
Front Panel
The HiPort’s LEDs are located on the Front panel .
Power
(Green/Amber) The Power LED lights
up green and will stay on while the HiPort is
powered on . When the HiPort goes through
its self-diagnostic mode during every boot-
up, this LED will flash . When the diagnostic is
complete, the LED will be solidly lit .
This LED flashes amber when the HiPort is
doing a firmware upgrade .
This LED alternately flashes green and amber
if a SIM card is not installed or if SIM card
registration fails .
This LED lights up amber if 911 Emergency
Calling has not been registered .
Phone
(Blue) This LED lights up blue when a
SIM card is correctly installed and registered .
This LED flashes blue if the HiPort has received
voice mail .
Ethernet
(Green) This LED serves two
purposes . If the LED is continuously lit, the
HiPort is successfully connected to a device . A
flashing LED indicates network activity .
Internet
(Green) The Internet LED lights up
when there is a connection made through the
Internet port . The LED flashes when there is
traffic .
Back Panel
Internet
Use this port to connect the HiPort
to your broadband Internet connection .
Ethernet
Use this port to connect the HiPort
to your networked PCs and other Ethernet
network devices .
Phone
Use this port to connect a phone to
the HiPort .
Reset
The Reset button can be used to reboot
the HiPort or to restore the HiPort’s factory
default settings .
To reboot the HiPort, press and release
•
the
Reset
button quickly using a pin or
straightened paper clip .
To restore the factory default
•
settings, press the
Reset
button for
approximately five seconds, using a
pin or straightened paper clip ( factory
defaults can also be restored via the
Administration > Factory Defaults
screen
of the HiPort’s web-based utility) .
Power
Use this port to connect the power
adapter .
SIM Card
Install the T-Mobile SIM card in this
slot .
IMPORTANT:
Resetting the HiPort will erase all
of your settings (Internet connection and other
settings) and replace them with the factory
defaults . Do not reset the HiPort if you want to
retain these settings .
Содержание HiPort
Страница 1: ......
