Cisco Firepower 1600 Скачать руководство пользователя страница 60

Страница: 60 / 62

The system does not save SCP passwords. If the configuration specifies that the utility must use SCP to transfer
ISO and other files to the appliance, you must re-authenticate to the server to complete the restore process.

The best time to save a configuration is after you provide the information listed above, but before you download
and mount the ISO image.

Save a Firepower Management Center Configuration

Before you begin

Complete Steps 1 through 5 of

Restore a Firepower Management Center to its Factory Defaults, on page 50

Procedure

Step 1

From the restore utility main menu, choose

6 Save Configuration

The utility displays the settings in the configuration you are saving.

Step 2

When prompted, confirm that you want to save the configuration.

Step 3

When prompted, enter a name for the configuration.

What to do next

If you want to use the saved configuration to perform a system restore, continue with Step 7 of

Restore a

Firepower Management Center to its Factory Defaults, on page 50

Load a Saved Firepower Management Center Configuration

You can load a previously-saved configuration to restore an FMC.

Procedure

Step 1

From the restore utility main menu, choose

7 Load Configuration

The utility presents a list of saved restore configurations. The first option,

default_config

, is the configuration

you last used to restore the appliance. The other options are restore configurations that you have saved.

Step 2

Choose the configuration you want to use.

The utility displays the settings in the configuration you are loading.

Step 3

When prompted, confirm that you want to load the configuration.

The configuration is loaded. If prompted, confirm the IP address assigned to the appliance’s management
interface.

Cisco Firepower Management Center 1600, 2600, and 4600 Getting Started Guide

Save a Firepower Management Center Configuration

Содержание Firepower 1600































































Результаты поиска

Содержание Firepower 1600

Отзывы:

Бренды по названию

Популярные бренды

Cisco Firepower 1600, Руководство по началу работы

Результаты поиска

Содержание Firepower 1600

Отзывы:

Бренды по названию

Популярные бренды