Configuring Device Security
Defining Access Methods
ESW 500 Series Switches Administration Guide
122
5
•
Interface — Indicates the interface type to which the rule applies. The possible
field values are:
-
Port
— Attaches the rule to the selected port.
-
EtherChannel
— Attaches the rule to the selected EtherChannel.
-
VLAN
— Attaches the rule to the selected VLAN.
•
Management Method — Defines the management method for which the rule is
defined. Users with this access profile can access the device using the
management method selected. The possible field values are:
-
All
— Assigns all management methods to the rule.
-
Telnet
— Assigns Telnet access to the rule. If selected, users accessing
the device using Telnet meeting access profile criteria are permitted or
denied access to the device.
-
SNMP
— Assigns SNMP access to the rule. If selected, users accessing
the device using SNMP meeting access profile criteria are permitted or
denied access to the device.
-
HTTP
— Assigns HTTP access to the rule. If selected, users accessing
the device using HTTP meeting access profile criteria are permitted or
denied access to the device.
-
Secure HTTP (SSL)
— Assigns HTTPS access to the rule. If selected,
users accessing the device using HTTPS meeting access profile criteria
are permitted or denied access to the device.
-
Secure Telnet (SSH)
— Assigns SSH access to the rule. If selected,
users accessing the device using Telnet meeting access profile criteria
are permitted or denied access to the device.
•
Source IP Address — Defines the interface source IP address to which the rule
applies.
•
Prefix Length — Defines the number of bits that comprise the source IP
address prefix, or the network mask of the source IP address.
•
Action — Defines the action attached to the rule. The possible field values are:
-
Permit
— Permits access to the device.
-
Deny
— Denies access to the device. This is the default.
STEP 2
Click the Add button. The
Add Profile Rule Page
opens:
