![background image](http://html.mh-extra.com/html/cisco/dpc2320-docsis/dpc2320-docsis_user-manual_64880072.webp)
Chapter 3 Configuring the DOCSIS Residential Gateway
54
4042831 Rev A
Setup Advanced Settings - VPN Setup Page Description
This section describes the section headings and field descriptions of the Setup
Advanced Settings - VPN Setup page. This page allows you to create, configure, and
control IPsec VPN tunnels.
Tunnel Section
Field Name
Description
Tunnel
Displays existing tunnels and allows each tunnel to be individually
configured.
Name
Displays the name of a group of settings for a single tunnel. If no name
is entered, the tunnels are named sequentially 1, 2, 3, and so on.
Enable/Disable
Enables/disables a VPN tunnel after the tunnel is named and
configured. Click
Apply
to activate the selected setting (Enabled or
Disabled).
Function Keys
The following table describes the function keys associated with the Tunnel section of
the VPN Setup page.
Key
Description
Delete Tunnel
Allows you to delete a tunnel.
Add New Tunnel
Allows you to create a heading for the tunnel settings that you can
select using the Tunnel drop-down menu.
Apply
Activates the selected setting (Enabled or Disabled).
Local Endpoint Settings
The following table describes the fields in the Local endpoint settings section of the
VPN Setup page.
Field Name
Description
Address group type
Allows you to select the address group type for the local VPN access
group. The following types are available:
IP subnet
Single IP address
IP address range
Subnet
Allows you to enter Subnet information based on the selected
Address group type as follows:
For IP subnet, enter the subnet.
For single IP address, enter only the specific IP address.
For IP address range, enter the starting and ending IP addresses.