2-14
Cisco Physical Security Multiservices Platform Series User Guide
OL-21838-03
Chapter 2 Setting Up and Maintaining the Multiservices Platform Series Device
Multiservices Platform Series Maintenance Operations
To replace a power supply, follow these steps:
Procedure
Step 1
Remove the AC power cord from the power supply that you are replacing.
Step 2
Push the release tab on the back of the power supply.
Step 3
Pull the power supply out using the handle that is provided.
Step 4
Push the new power supply into the power bay until you hear a click.
Step 5
Plug the AC power cord back into the supply.
Checking Air Flow
It is important to maintain proper air flow in and around the Multiservices Platform Series device so that
the device operates properly and does not overheat. To ensure proper air flow, follow these guidelines:
•
Make sure that no objects obstruct the air flow into and out of the device. If necessary, route cables
through the cable rack.
•
Do not operate the device without hard drives.
•
Make sure that no wires or foreign objects obstruct air flow through the chassis. Pull excess cabling
out of the air flow path or use shorter cables.
•
Do not operate the device for extended periods without the chassis cover in place.
•
Use only recommended server parts.
